| AMBIENT TEMP AT FULL RATED POWER | 25.0 CELSIUS |
| BODY HEIGHT | 0.188 INCHES NOMINAL |
| BODY LENGTH | 0.750 INCHES NOMINAL |
| BODY WIDTH | 0.281 INCHES NOMINAL |
| INCLOSURE TYPE | ENCASED |
| MAXIMUM OPERATING TEMP | 100.0 CELSIUS |
| POWER DISSIPATION CONSTANT IN MILLIWATTS PER DEG CELSIUS | 1.9 |
| RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT | -15.0 TO 15.0 ALL RESISTANCE-TEMPERATURE POINTS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| ZERO POWER RESISTANCE AT SPECIFIED TEMP | 1.2 KILOHMS 6TH RESISTANCE-TEMPERATURE POINT |
| ZERO POWER RESISTANCE AT SPECIFIED TEMP | 2.8 KILOHMS 5TH RESISTANCE-TEMPERATURE POINT |
| ZERO POWER RESISTANCE AT SPECIFIED TEMP | 23.9 KILOHMS 2ND RESISTANCE-TEMPERATURE POINT |
| ZERO POWER RESISTANCE AT SPECIFIED TEMP | 44.5 KILOHMS 1ST RESISTANCE-TEMPERATURE POINT |
| ZERO POWER RESISTANCE AT SPECIFIED TEMP | 5.3 KILOHMS 4TH RESISTANCE-TEMPERATURE POINT |
| ZERO POWER RESISTANCE AT SPECIFIED TEMP | 9.7 KILOHMS 3RD RESISTANCE-TEMPERATURE POINT |
| ZERO POWER RESISTANCE TOLERANCE IN PERCENT AT REFERENCE TEMP | -1.0 TO 1.0 |
| ZERO POWER RESISTANCE | 15.000 KILOHMS |
| STYLE DESIGNATOR | PROBE, SURFACE MOUNTING |
| TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER | 127.0 FAHRENHEIT 4TH RESISTANCE-TEMPERATURE POINT |
| TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER | 162.0 FAHRENHEIT 5TH RESISTANCE-TEMPERATURE POINT |
| TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER | 212.0 FAHRENHEIT 6TH RESISTANCE-TEMPERATURE POINT |
| TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER | 32.0 FAHRENHEIT 1ST RESISTANCE-TEMPERATURE POINT |
| TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER | 57.0 FAHRENHEIT 2ND RESISTANCE-TEMPERATURE POINT |
| TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER | 97.0 FAHRENHEIT 3RD RESISTANCE-TEMPERATURE POINT |
| TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 49671-2187613 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.150 INCHES NOMINAL |