| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 MINIMUM |
| ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS 1ST SECTION |
| ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS 2ND SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| BODY DIAMETER | 2.021 INCHES MINIMUM AND 2.031 INCHES MAXIMUM |
| BODY LENGTH | 4.240 INCHES MINIMUM AND 4.250 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FEATURES PROVIDED | NONMETALLIC SHAFT |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.05 TO 0.05 ALL SECTIONS |
| LATERAL RUNOUT | 0.003 INCHES |
| OVERALL DIAMETER | 2.380 INCHES MINIMUM AND 2.391 INCHES MAXIMUM |
| OVERALL LENGTH | 5.074 INCHES MINIMUM AND 5.156 INCHES MAXIMUM |
| MAXIMUM RUNNING TORQUE | 2.00 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 4.00 INCH-OUNCES |
| MOUNTING LIP DEPTH | 0.09300 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 1.99000 INCHES MINIMUM AND 2.00500 INCHES MAXIMUM |
| MOUNTING METHOD | CLAMP RING |
| PILOT LENGTH | 0.06200 INCHES NOMINAL |
| PILOT DIAMETER RUNOUT | 0.00200 INCHES |
| PILOT DIAMETER | 1.87400 INCHES MINIMUM AND 1.87500 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 5.0 FREE AIR ALL SECTIONS |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3680.0 MINIMUM |
| SECTION QUANTITY | 2 |
| SHAFT BEARING TYPE | BALL |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| SHAFT END PLAY | 0.00250 INCHES |
| SHAFT RADIAL PLAY | 0.002 INCHES |
| SHAFT RUNOUT | 0.001 INCHES |
| SHAFT STYLE | ROUND, SLOTTED |
| SHAFT LENGTH | 0.750 INCHES NOMINAL |
| SPECIAL FEATURES | EXTERNAL FIXED RESISTOR MTD BETWEEN TERMINAL 3 AND 4 BOTH SECTIONS |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -150.0 TO 150.0 ALL SECTIONS |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 8 TURRET |
| TEST DATA DOCUMENT | 10001-2877112 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNDERCUT DIAMETER | 1.865 INCHES MINIMUM AND 1.875 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.07300 INCHES MINIMUM AND 0.08300 INCHES MAXIMUM |