|
|
|
National Stock Number:
5905-00-148-4477
Federal Supply Class:
5905
National Item Identification Number:
001484477
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 5905001484477 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5905001484477 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | MIL-R-39015/3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RTR22DX202M | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 7200.0 MINIMUM AND 15120.0 MAXIMUM | | ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | | BODY HEIGHT | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM | | BODY LENGTH | 0.490 INCHES MINIMUM AND 0.540 INCHES MAXIMUM | | BODY WIDTH | 0.180 INCHES MINIMUM AND 0.230 INCHES MAXIMUM | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM | | CUBIC MEASURE | 0.063 CUBIC INCHES | | FEATURES PROVIDED | HUMIDITY PROOF | | FRAGILITY FACTOR | MODERATELY RUGGED | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.513 INCHES MINIMUM AND 0.526 INCHES MAXIMUM | | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING HOLE DIAMETER | 0.068 INCHES MINIMUM AND 0.078 INCHES MAXIMUM | | MOUNTING METHOD | UNTHREADED HOLE | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL | | SECTION QUANTITY | 1 | | SHAFT BEARING TYPE | SLEEVE | | SHAFT DIAMETER | 0.058 INCHES MINIMUM AND 0.098 INCHES MAXIMUM | | SHAFT LENGTH | 0.045 INCHES MAXIMUM | | SHAFT STYLE | ROUND, SLOTTED | | SPECIFICATION/STANDARD DATA | 81349-MIL-R-39015/2 GOVERNMENT SPECIFICATION | | TERMINAL LENGTH | 0.172 INCHES MINIMUM | | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW | | TERMINAL TYPE AND QUANTITY | 3 PIN | | TEST DATA DOCUMENT | 81349-MIL-R-39015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|