|
|
|
National Stock Number:
5905-00-148-3776
Federal Supply Class:
5905
National Item Identification Number:
001483776
Description:
RESISTOR,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| 10833-5 | 36452 | DRS TECHNOLOGIES CANADA LTD | | 10833-5 | 38200 | DRS TECHNOLOGIES CANADA LTD. | | S102-8-856K-011P | 18612 | VISHAY INTERTECHNOLOGY, INC. | | S102-8-856K011PPM | 18612 | VISHAY INTERTECHNOLOGY, INC. | | S102-88560HMSP0RM-01PCT1PPM | 18612 | VISHAY INTERTECHNOLOGY, INC. | | S1028856-011PPM | 18612 | VISHAY INTERTECHNOLOGY, INC. | | S102C-8856 0HMS P0RM.01PCT1PPM | 18612 | VISHAY INTERTECHNOLOGY, INC. | | S102C-8856 OHMS PORM.01PCT1PPM | 18612 | VISHAY INTERTECHNOLOGY, INC. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 8.856 KILOHMS | | AMBIENT TEMP AT FULL RATED POWER | 125.0 CELSIUS | | BODY HEIGHT | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM | | BODY LENGTH | 0.285 INCHES MINIMUM AND 0.305 INCHES MAXIMUM | | BODY WIDTH | 0.300 INCHES MINIMUM AND 0.340 INCHES MAXIMUM | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.300 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -0.010 TO 0.010 | | STYLE DESIGNATOR | TERMINALS ONE EDGE | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -1.0 TO 1.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | +0.0 TO 60.0 | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 10833-36452 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|