| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 349.0 MINIMUM |
| ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS 1ST SECTION AND 5.000 KILOHMS 2ND SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| BODY DIAMETER | 1.458 INCHES MINIMUM AND 1.468 INCHES MAXIMUM |
| BODY LENGTH | 1.739 INCHES MINIMUM AND 1.749 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FEATURES PROVIDED | NONMETALLIC SHAFT |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE CONFORMITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.40 TO 0.40 SINGLE SECTION |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION TABLE |
| LATERAL RUNOUT | 0.003 INCHES |
| OVERALL DIAMETER | 1.813 INCHES MINIMUM AND 1.828 INCHES MAXIMUM |
| OVERALL LENGTH | 2.531 INCHES MINIMUM AND 2.655 INCHES MAXIMUM |
| MAXIMUM RUNNING TORQUE | 1.35 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 1.80 INCH-OUNCES |
| MOUNTING METHOD | CLAMP RING |
| MOUNTING LIP DEPTH | 0.08800 INCHES MINIMUM AND 0.09800 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 1.42700 INCHES MINIMUM AND 1.44200 INCHES MAXIMUM |
| PILOT DIAMETER RUNOUT | 0.00100 INCHES |
| PILOT DIAMETER | 1.31200 INCHES MINIMUM AND 1.31250 INCHES MAXIMUM |
| PILOT LENGTH | 0.05700 INCHES MINIMUM AND 0.06700 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 2ND SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SECTION QUANTITY | 2 |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| SHAFT BEARING TYPE | BALL |
| SHAFT LENGTH | 0.750 INCHES NOMINAL |
| SHAFT END PLAY | 0.00250 INCHES |
| SHAFT RADIAL PLAY | 0.001 INCHES |
| SHAFT RUNOUT | 0.001 INCHES |
| SHAFT STYLE | ROUND, SLOTTED |
| SPECIAL FEATURES | EXTERNAL FIXED RESISTOR MTD ACROSS TERMINAL 1 AND 4 EACH SECTION |
| UNDERCUT DIAMETER | 1.303 INCHES MINIMUM AND 1.313 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.07300 INCHES MINIMUM AND 0.07800 INCHES MAXIMUM |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -150.0 TO 150.0 SINGLE SECTION |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 4 TURRET |
| TEST DATA DOCUMENT | 10001-2877111 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |