|
|
|
National Stock Number:
5905-00-147-5648
Federal Supply Class:
5905
National Item Identification Number:
001475648
Description:
RESISTOR,FIXED,WIRE WOUND
Detail:
INC 37404 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The items must have inherent characteristics of inducing little or no self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, INDUCTIVE.
|
Manufacturer Information:
| MIL-PRF-39005/1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-R-39005/1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RBR52L32R00BR | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 32.000 OHMS | | RESISTANCE TOLERANCE IN PERCENT | -0.100 TO 0.100 | | POWER DISSIPATION RATING IN WATTS | 0.500 FREE AIR | | AMBIENT TEMP AT FULL RATED POWER | 125.0 DEG CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 145.0 | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | RELIABILITY INDICATOR | ESTABLISHED | | INCLOSURE TYPE | ENCAPSULATED | | TERMINAL TYPE | WIRE LEAD | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -15.0 TO 15.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -65.0 TO 145.0 | | BODY DIAMETER | 0.360 INCHES MINIMUM AND | | 0.390 INCHES MAXIMUM | | BODY LENGTH | 0.968 INCHES MINIMUM AND | | 1.020 INCHES MAXIMUM | | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 | | TERMINAL LENGTH | 1.500 INCHES MINIMUM | | CUBIC MEASURE | 0.122 CUBIC INCHES | | TEST DATA DOCUMENT | 81349-MIL-R-39005 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPECIFICATION/STANDARD DATA | 81349-MIL-R-39005/1 GOVERNMENT SPECIFICATION | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81349 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-PRF-39005/1 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | RBR52L32R00BR |
|
|