|
|
|
National Stock Number:
5905-00-147-1423
Federal Supply Class:
5905
National Item Identification Number:
001471423
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 2100-3008 | 1LQK8 | KEYSIGHT TECHNOLOGIES, INC. | | 2100-3008 | 28480 | HEWLETT-PACKARD COMPANY | | 2100-3008 | 7ZXR5 | KEYSIGHT TECHNOLOGIES INC | | 45-101M | 11236 | CTS CORP BERNE DIV THICK FILM PRODUCTS GROUP | | 470-101M | 12697 | CLAROSTAT SENSORS AND CONTROLS | | A2100-3008-1 | 1LQK8 | KEYSIGHT TECHNOLOGIES, INC. | | A2100-3008-1 | 28480 | HEWLETT-PACKARD COMPANY | | A2100-3008-1 | 7ZXR5 | KEYSIGHT TECHNOLOGIES INC | | A2100-9080-1 | 1LQK8 | KEYSIGHT TECHNOLOGIES, INC. | | A2100-9080-1 | 28480 | HEWLETT-PACKARD COMPANY | | A2100-9080-1 | 7ZXR5 | KEYSIGHT TECHNOLOGIES INC |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 300.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 100.0 OHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION | | BODY DIAMETER | 0.969 INCHES MAXIMUM | | BODY LENGTH | 0.719 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | FEATURES PROVIDED | SWITCH | | OPERATING POSITION | END OF ROTATION | | OVERALL DIAMETER | 1.203 INCHES MAXIMUM | | OVERALL LENGTH | 1.342 INCHES NOMINAL | | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 20.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 320.0 NOMINAL | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT LENGTH | 0.375 INCHES NOMINAL | | SHAFT STYLE | ROUND, SLOTTED | | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED | | SWITCH CURRENT TYPE AND RATING IN AMPS | 1.000 AC/DC AND 3.000 AC/DC | | SWITCH TYPE | ROTARY | | SWITCH VOLTAGE RATING IN VOLTS | 250.0 AND 125.0 | | TERMINAL LOCATION | REAR-BOTTOM | | TERMINAL TYPE AND QUANTITY | 5 TAB, SOLDER LUG | | TEST DATA DOCUMENT | 28480-A2100-3008-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|