5130-00-144-2065 POWER UNIT,PNEUDRAU Index 5940-00-144-2068 TERMINAL,LUG

National Stock Number:
5905-00-144-2066

Federal Supply Class:
5905

National Item Identification Number:
001442066

Description:
RESISTOR,FIXED,WIRE WOUND,INDUCT

Detail:
INC 37403 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.


Manufacturer Information:
8213508-1019200US ARMY ARDEC RDECOM
MIL-PRF-39009/181349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-R-39009/181349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RER70F31R6M81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RER70F31R6P81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RER70F31R6R81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
ELECTRICAL RESISTANCE31.600 OHMS
AMBIENT TEMP AT FULL RATED POWER25.0 CELSIUS
AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER275.0
BODY HEIGHT0.562 INCHES NOMINAL
BODY LENGTH1.062 INCHES NOMINAL
BODY WIDTH0.531 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH0.719 INCHES NOMINAL
HEAT SINK HEIGHT2.000 INCHES
HEAT SINK LENGTH7.000 INCHES
HEAT SINK THICKNESS0.040 INCHES
HEAT SINK WIDTH5.000 INCHES
INCLOSURE TYPEENCASED
MATERIALALUMINUM ALLOY HEAT SINK
MOUNTING HOLE SIZE0.125 INCHES NOMINAL
POWER DISSIPATION RATING IN WATTS8.000 FREE AIR
REACTANCE CHARACTERISTICINDUCTIVE
RELIABILITY INDICATORESTABLISHED
RELIABILITY FAILURE RATE LEVEL IN PERCENT0.010
RESISTANCE TOLERANCE IN PERCENT-1.000 TO 1.000
SPECIFICATION/STANDARD DATA81349-MIL-R-39009/1 GOVERNMENT SPECIFICATION
STYLE DESIGNATORAXIAL TERMINAL (S)
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS-30.0 TO 30.0
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS-55.0 TO 275.0
TERMINAL LENGTH0.438 INCHES NOMINAL
TERMINAL TYPETAB, SOLDER LUG
TEST DATA DOCUMENT81349-MIL-R-39009 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).


Click here to Register for Free 30-day Trial