|
|
|
National Stock Number:
5905-00-141-3882
Federal Supply Class:
5905
National Item Identification Number:
001413882
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 10132432 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 3200-911 | 11534 | BEI SENSORS & SYSTEMS COMPANY, INC. |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS 1ST SECTION AND 10.0 KILOHMS 2ND SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 60.0 ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 ALL SECTIONS | | BODY DIAMETER | 0.875 INCHES NOMINAL | | BODY LENGTH | 3.120 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FRAGILITY FACTOR | MODERATELY RUGGED | | FUNCTION CHARACTERISTIC PER SECTION | 1ST SECTION LINEAR AND 2ND SECTION EQUATION | | FUNCTION CONFORMITY PER SECTION | 1ST SECTION INDEPENDENT LINEARITY AND 2ND SECTION ABSOLUTE CONFORMITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 1ST SECTION AND -2.00 TO 2.00 2ND SECTION | | LATERAL RUNOUT | 0.002 INCHES | | MAXIMUM STARTING TORQUE | 3.00 INCH-OUNCES | | MAXIMUM RUNNING TORQUE | 2.00 INCH-OUNCES | | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 0.7810 INCHES MAXIMUM | | MOUNTING METHOD | CLAMP RING | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | PILOT DIAMETER RUNOUT | 0.002 INCHES | | PILOT DIAMETER | 0.6250 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 1ST SECTION AND -5.0 TO 5.0 2ND SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 NOMINAL | | SECTION QUANTITY | 2 | | SHAFT END PLAY | 0.003 INCHES | | SHAFT DIAMETER | 0.125 INCHES NOMINAL | | SHAFT RADIAL PLAY | 0.002 INCHES | | SHAFT RUNOUT | 0.0005 INCHES | | SHAFT STYLE | ROUND | | SHAFT LENGTH | 0.625 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.870 INCHES NOMINAL | | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL | | TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 6 TURRET | | TEST DATA DOCUMENT | 18876-10132432 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|