5905-00-141-0687, RESISTOR,VARIABLE,WIRE WOUND,NON

5905-00-141-0686 RESISTOR,FIXED,WIRE WOUND,INDUCTIVE

5905-00-141-0689 RESISTOR,FIXED,WIRE WOUND,NONIND

National Stock Number:
5905-00-141-0687

Federal Supply Class:
5905

National Item Identification Number:
001410687

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

932037+20	94580	HONEYWELL INTERNATIONAL INC.
M39015-1-004PM	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-R-39015/1	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RTR12DP102M	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

ELECTRICAL RESISTANCE PER SECTION	1.0 KILOHMS SINGLE SECTION
ACTUATOR TYPE	SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
BODY HEIGHT	0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
BODY LENGTH	1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM
BODY WIDTH	0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
BODY STYLE	RECTANGULAR W/MOUNTING HOLES/SLOTS
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM
FRAGILITY FACTOR	MODERATELY DELICATE
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	1.000 INCHES NOMINAL
OVERALL HEIGHT	0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
OVERALL LENGTH	1.300 INCHES MINIMUM AND 1.340 INCHES MAXIMUM
OVERALL WIDTH	0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
MAXIMUM RUNNING TORQUE	0.10 INCH-OUNCES
MAXIMUM STARTING TORQUE	5.00 INCH-OUNCES
MOUNTING FACILITY QUANTITY	2
MOUNTING HOLE DIAMETER	0.093 INCHES NOMINAL
MOUNTING METHOD	UNTHREADED HOLE
POWER DISSIPATION RATING PER SECTION IN WATTS	0.75 FREE AIR SINGLE SECTION
RELIABILITY INDICATOR	ESTABLISHED
RELIABILITY FAILURE RATE LEVEL IN PERCENT	1.000
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION
SECTION QUANTITY	1
SHAFT DIAMETER	0.095 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
SHAFT LENGTH	0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
SHAFT STYLE	ROUND, SLOTTED
SPECIFICATION/STANDARD DATA	81349-MIL-R-39015/1 GOVERNMENT SPECIFICATION
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-50.0 TO 50.0 SINGLE SECTION
TERMINAL LENGTH	0.463 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
TERMINAL LOCATION	LOWER ADJACENT SIDE SINGLE ROW
TERMINAL TYPE AND QUANTITY	3 PIN
TEST DATA DOCUMENT	81349-MIL-R-39015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial