|
|
|
National Stock Number:
5905-00-140-5429
Federal Supply Class:
5905
National Item Identification Number:
001405429
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 3320-443 | 90073 | CMC ELECTRONICS INC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 1.000 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 125.0 SINGLE SECTION | | BODY HEIGHT | 0.312 INCHES NOMINAL | | BODY LENGTH | 1.250 INCHES NOMINAL | | BODY WIDTH | 0.281 INCHES NOMINAL | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.000 INCHES NOMINAL | | OVERALL HEIGHT | 0.312 INCHES NOMINAL | | OVERALL LENGTH | 1.297 INCHES NOMINAL | | OVERALL WIDTH | 0.281 INCHES NOMINAL | | MOUNTING HOLE DIAMETER | 0.086 INCHES MINIMUM | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | SECTION QUANTITY | 1 | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION | | TERMINAL LENGTH | 11.500 INCHES MINIMUM | | TEST DATA DOCUMENT | 90073-3320-443 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|