5985-00-140-3357 SWITCH,RADIO FREQUENCY TRANSMISS Index 5905-00-140-3359 RESISTOR,VARIABLE,WIRE WOUND,NON

National Stock Number:
5905-00-140-3358

Federal Supply Class:
5905

National Item Identification Number:
001403358

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.


Manufacturer Information:
3535S1-50280294BOURNS INSTRUMENTS INC


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION350.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION5.0 KILOHMS SINGLE SECTION
ACTUATOR TYPESINGLE SHAFT
ACTUATOR TRAVEL CONTROL FEATURESTOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
BODY DIAMETER0.875 INCHES NOMINAL
BODY LENGTH0.681 INCHES NOMINAL
BODY STYLECYLINDRICAL BUSHING MOUNTED
FRAGILITY FACTORMODERATELY RUGGED
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.50 TO 0.50 SINGLE SECTION
OVERALL LENGTH1.181 INCHES NOMINAL
MAXIMUM RUNNING TORQUE0.15 INCH-OUNCES
MAXIMUM STARTING TORQUE0.15 INCH-OUNCES
MOUNTING BUSHING LENGTH0.250 INCHES NOMINAL
MOUNTING METHODSTANDARD BUSHING
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-3.0 TO 3.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG350.0 NOMINAL
SCREW THREAD QUANTITY PER INCH32.0
SCREW THREAD SERIES DESIGNATORUNEF
SCREW THREAD DIAMETER0.375 INCHES NOMINAL
SECTION QUANTITY1
SHAFT DIAMETER0.1245 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM
SHAFT RADIAL PLAY0.003 INCHES
SHAFT RUNOUT0.001 INCHES
SHAFT STYLEROUND, SLOTTED
SHAFT LENGTH0.500 INCHES NOMINAL
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-20.0 TO 20.0 SINGLE SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY3 TURRET
TEST DATA DOCUMENT80294-BOURNS ENGINEERING SPECIFICATIONS SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).


Click here to Register for Free 30-day Trial