|
|
|
National Stock Number:
5905-00-139-5737
Federal Supply Class:
5905
National Item Identification Number:
001395737
Description:
RESISTOR,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| 2425338-1 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 2425338-1 | 11502 | INTERNATIONAL RESISTIVE COMPANY, INC. DIV WIRE AND FILM TECHNOLOGIES (WAFT) | | 2425338-1CEA | 75042 | TRW INC TRW ELECTRONIC COMPONENTS IRC FIXED RESISTORS PHILADELPHIA DIV | | CEAT2-4850C | 75042 | TRW INC TRW ELECTRONIC COMPONENTS IRC FIXED RESISTORS PHILADELPHIA DIV | | RNC55H4850C | 31033 | TRW INC TRW INTL TRADE GOVERNMENT SALES DEPT |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 485.000 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 125.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 175.0 | | BODY DIAMETER | 0.090 INCHES NOMINAL | | BODY LENGTH | 0.250 INCHES NOMINAL | | INCLOSURE TYPE | ENCAPSULATED | | MIL-STD-1276 WIRE LEAD TYPE DESIGNATOR | C | | POWER DISSIPATION RATING IN WATTS | 0.100 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -0.250 TO 0.250 | | UNPACKAGED UNIT WEIGHT | 0.3 GRAMS | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0 TO 50.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 175.0 | | TERMINAL LENGTH | 1.500 INCHES NOMINAL | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 10001-2425338 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|