5905-00-137-7942, RESISTOR,VARIABLE,WIRE WOUND,NON

National Stock Number:
5905-00-137-7942

Federal Supply Class:
5905

National Item Identification Number:
001377942

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

05-507963	31435	LUCAS AEROSPACE POWER EQUIPMENT CORPORATION
224P1-253	80294	BOURNS INSTRUMENTS INC

Techincal Specification:

ELECTRICAL RESISTANCE PER SECTION	25.000 KILOHMS SINGLE SECTION
ACTUATOR TYPE	SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	175.0 SINGLE SECTION
BODY HEIGHT	0.307 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
BODY LENGTH	1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM
BODY WIDTH	0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
BODY STYLE	RECTANGULAR W/MOUNTING HOLES/SLOTS
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM
OVERALL HEIGHT	0.807 INCHES MINIMUM AND 0.830 INCHES MAXIMUM
OVERALL LENGTH	1.310 INCHES MINIMUM AND 1.330 INCHES MAXIMUM
OVERALL WIDTH	0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
MOUNTING FACILITY QUANTITY	2
MOUNTING HOLE DIAMETER	0.088 INCHES MINIMUM AND 0.093 INCHES MAXIMUM
MOUNTING METHOD	UNTHREADED HOLE AND TERMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS	1.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATOR	NOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION
SECTION QUANTITY	1
SHAFT DIAMETER	0.105 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
SHAFT LENGTH	0.070 INCHES NOMINAL
SHAFT STYLE	ROUND, SLOTTED
TERMINAL LENGTH	0.500 INCHES NOMINAL
TERMINAL LOCATION	LOWER ADJACENT SIDE SINGLE ROW
TERMINAL TYPE AND QUANTITY	3 PIN

Click here to Register for Free 30-day Trial