|
|
|
National Stock Number:
5905-00-137-7186
Federal Supply Class:
5905
National Item Identification Number:
001377186
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 41297 28808 | D8385 | THALES DEUTSCHLAND GMBH | | B75A0015-3203 | 12464 | MCDONNELL DOUGLAS CORP MCDONNELL DOUGLAS ELECTRONIC SYSTEMS CO | | LVT5241.03-103460 | D0078 | DIEHL DEFENCE GMBH & CO. KG | | MILR22097-5 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RJ26FX203 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | | BODY HEIGHT | 0.250 INCHES NOMINAL | | BODY LENGTH | 0.250 INCHES NOMINAL | | BODY WIDTH | 0.165 INCHES NOMINAL | | BODY STYLE | RECTANGULAR | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL | | FEATURES PROVIDED | NONMETALLIC SHAFT | | MOUNTING METHOD | TERMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.25 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.075 INCHES NOMINAL | | SHAFT LENGTH | 0.050 INCHES MAXIMUM | | SHAFT STYLE | ROUND, SLOTTED | | SPECIFICATION/STANDARD DATA | 81349-MIL-R-22097/5 GOVERNMENT SPECIFICATION | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION | | TERMINAL LENGTH | 0.172 INCHES MINIMUM | | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS | | TERMINAL TYPE AND QUANTITY | 3 PIN | | TEST DATA DOCUMENT | 81349-MIL-R-22097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|