5905-00-136-8039, RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-00-136-8039

Federal Supply Class:
5905

National Item Identification Number:
001368039

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

08C2-2889	19176	SERVO INSTRUMENT CORPORATION
1908926-2	19315	HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS
1908926-2	55972	HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS
A261	04454	SENSOR SYSTEMS, L.L.C.

Techincal Specification:

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	254.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION	10.000 KILOHMS ALL SECTIONS
ACTUATOR TRAVEL CONTROL FEATURE	CONTINUOUS MOTION
ACTUATOR TYPE	SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 ALL SECTIONS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	125.0 ALL SECTIONS
BODY DIAMETER	0.500 INCHES NOMINAL
BODY LENGTH	0.785 INCHES MAXIMUM
BODY STYLE	CYLINDRICAL SERVO MOUNTED
FIXED TAP QUANTITY PER SECTION	1 ALL SECTIONS
FUNCTION CONFORMITY TOLERANCE PER SECTION	-0.01 TO 0.01 ALL SECTIONS
FUNCTION CHARACTERISTIC PER SECTION	ALL SECTIONS LINEAR
FUNCTION CONFORMITY PER SECTION	ALL SECTIONS INDEPENDENT LINEARITY
MOUNTING METHOD	CLAMP RING
MOUNTING LIP DEPTH	0.0620 INCHES NOMINAL
MOUNTING LIP DIAMETER	0.5000 INCHES NOMINAL
SPECIAL FEATURES	127 DEG TO RIGHT AND LEFT OF CENTER TAP
PILOT DIAMETER	0.3750 INCHES NOMINAL
PILOT LENGTH	0.0620 INCHES NOMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS	2.0 FREE AIR ALL SECTIONS
RELIABILITY INDICATOR	NOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-20.0 TO 20.0 ALL SECTIONS
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	360.0 NOMINAL
SECTION QUANTITY	2
SHAFT DIAMETER	0.0932 INCHES MINIMUM AND 0.0937 INCHES MAXIMUM
SHAFT BEARING TYPE	BEARING
SHAFT LENGTH	0.370 INCHES NOMINAL
SHAFT STYLE	ROUND
UNDERCUT DIAMETER	0.375 INCHES NOMINAL
UNDERCUT WIDTH	0.0620 INCHES NOMINAL
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION	0.0 ALL SECTIONS
TAP LOCATION TOLERANCE PER SECTION	-5.0 TO 5.0 DEG ANGULAR ROTATION ALL SECTIONS
TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY	8 WIRE LEAD
TEST DATA DOCUMENT	19315-1908926 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

Click here to Register for Free 30-day Trial