|
|
|
National Stock Number:
5365-01-590-9525
Federal Supply Class:
5365
National Item Identification Number:
015909525
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| LS1041665 | 01417 | GENERAL DYNAMICS LAND SYSTEMS INC. |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 4 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.230 NOMINAL INCHES | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.630 INCHES NOMINAL | | HOLE DIAMETER | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A1008 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A1011 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.190 NOMINAL INCHES | | OVERALL LENGTH | 1.720 INCHES MINIMUM AND 1.780 INCHES MAXIMUM | | OVERALL THICKNESS | 0.060 INCHES NOMINAL | | OVERALL WIDTH | 0.433 INCHES MINIMUM AND 0.493 INCHES MAXIMUM | | SPECIAL FEATURES | TOTAL BOLT HOLES 4 WITH 2 HOLES 0.180-0.200 MIN-MAX INCH DIA AND 2 HOLES 0.260-0.280 MIN-MAX INCH DIA | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
|
|