|
|
|
National Stock Number:
5365-01-587-1981
Federal Supply Class:
5365
National Item Identification Number:
015871981
Description:
SPACER,SPECIAL SHAPED
Detail:
A METALLIC OR NONMETALLIC ITEM OF VARIOUS PERIPHERAL SHAPES AND A SOLID CROSS-SECTION. IT IS DESIGNED TO MAINTAIN A PREDETERMINED DISTANCE BETWEEN TWO SURFACES. IT MAY HAVE FLAT PARALLEL BEARING SURFACES. DO NOT USE IF A MORE SPECIFIC NAME APPLIES. SEE ALSO SPACER, RING; SPACER, PLATE; SPACER, SLEEVE; SPACER, STEPPED; SHIM AND WASHER, FLAT.
|
Manufacturer Information:
| 912877 | 36659 | LOCKHEED MARTIN CORP LOCKHEED MARTIN AERONAUTICAL SYSTEMS BURBANK OPNS | | 912877-1 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | OVERALL LENGTH | 2.590 INCHES MINIMUM AND 2.650 INCHES MAXIMUM | | OVERALL WIDTH | 0.850 INCHES MINIMUM AND 0.910 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18728 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 8630 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM-UPLOCK CLEVIS, BOMB BAY DOOR | | SPECIAL FEATURES | ITEM IS FLAT ON TOP SIDE AND CURVED ON BOTTOM SIDE; BOTH HOLES ARE LOCATED ON THE SAME CENTER LINE LOCATED 0.44 FROM THE EDGE, ONE HOLE DIA IS 0.311 TO 0.318 INCH AND THE OTHER DIA IS 0.452 TO 0.459 INCH; CENTER TO CENTER DISTANCE BETWEEN HOLES IS 1.250; LARGEST DIA HOLE LOCATED 0.68 FROM END; CURVED BOTTOM HAS A 0.50 RADIUS AND IS FLAT IN THE CENTER FOR A DISTANCE 0.220 TO 0.250 INCH; SURFACE ROUGHNESS IS 500; ITEM MADE FROM MATERIAL 0.125 THICK; HEAT TREAT ULT TS PSI 95,000 MIN |
|
|