5365-01-566-6530 SPACER,SLEEVE Index 5365-01-566-6906 SHIM

National Stock Number:
5365-01-566-6831

Federal Supply Class:
5365

National Item Identification Number:
015666831

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.


Manufacturer Information:
406940A110988CNH INDUSTRIAL AMERICA LLC


Techincal Specification:
PART NAME ASSIGNED BY CONTROLLING AGENCYBAR CLAMP BACK
PROPRIETARY CHARACTERISTICSPACS
OVERALL LENGTH130.2 MILLIMETERS NOMINAL
OVERALL THICKNESS3.4 MILLIMETERS NOMINAL
OVERALL WIDTH25.4 MILLIMETERS NOMINAL
SPECIAL FEATURESTWO HOLES DIAMETER 7.1 MM EACH
STYLE DESIGNATORRECTANGULAR
SURFACE TREATMENTZINC


Click here to Register for Free 30-day Trial