5365-01-565-2166 BUSHING BLANK Index 5365-01-565-2125 PLUG,MACHINE THREAD

National Stock Number:
5365-01-565-2288

Federal Supply Class:
5365

National Item Identification Number:
015652288

Description:
SHIM

Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.


Manufacturer Information:
336731845152OSHKOSH CORP
336731875Q65OSHKOSH DEFENSE LLC


Techincal Specification:
APERTURE DIAMETER5.188 INCHES NOMINAL
BOLT CIRCLE DIAMETER7.250 INCHES NOMINAL
BOLT HOLE QUANTITY10
CONSTRUCTIONONE-PIECE
GASKET CENTER TO FLAT DISTANCE3.625 INCHES NOMINAL
HOLE DIAMETER0.562 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONA109 ASSN STD SINGLE MATERIAL RESPONSE
MATERIALSTEEL
PART NAME ASSIGNED BY CONTROLLING AGENCYSHIM 5.188X0.125X0.003 UP
PROPRIETARY CHARACTERISTICSPACS
OUTSIDE DIAMETER8.125 INCHES NOMINAL
OVERALL THICKNESS0.003 INCHES NOMINAL
SPECIAL FEATURESKEYWAY NOTCH LOCATED ON INNER APERTURE OPPOSITE PERIPHERAL FLAT, 0.500 INCHES WIDE NOMINAL BY 0.469 INCHES NOMINAL DEPTH; SEE DRAWING FOR DETAIL
STYLE DESIGNATORCIRCULAR W/ONE PERIPHERAL FLAT


Click here to Register for Free 30-day Trial