|
|
|
National Stock Number:
5365-01-560-8378
Federal Supply Class:
5365
National Item Identification Number:
015608378
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 8197372 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| END CUT ANGLE | 0.5 RADIANS | | MATERIAL | ALUMINUM ALLOY | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM AFT STANCHION SUPPORT | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 24.000 INCHES NOMINAL | | OVERALL THICKNESS | 0.150 INCHES NOMINAL | | SPECIAL FEATURES | MILITARY DWG IS EXPORT CONTROLLED-NOT TO BE RELEASED OUTSIDE USA | | STYLE DESIGNATOR | STRIP | | SUPPLEMENTARY FEATURES | HAS 6 CUTOUTS ALONG ONE EDGE EQUALLY SPACED APART WITH RADIOUS OF .250 EACH |
|
|