|
|
|
National Stock Number:
5365-01-547-6542
Federal Supply Class:
5365
National Item Identification Number:
015476542
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 901-025-010-169 | 77272 | THE BOEING COMPANY |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 4 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.790 INCHES MINIMUM AND 0.850 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 3.070 INCHES MINIMUM AND 3.130 INCHES MAXIMUM | | HOLE DIAMETER | 0.218 INCHES MINIMUM AND 0.229 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS-QQ-A-250/11 FED SPEC ALL MATERIAL RESPONSES | | MATERIAL | ALUMINUM ALLOY 6061 | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.410 INCHES MINIMUM AND 0.470 INCHES MAXIMUM | | OVERALL LENGTH | 10.160 INCHES MINIMUM AND 10.220 INCHES MAXIMUM | | OVERALL THICKNESS | 0.070 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | OVERALL WIDTH | 1.220 INCHES MINIMUM AND 1.280 INCHES MAXIMUM | | SPECIAL FEATURES | CHEM TREAT PER VF-3.49, PRIME PER VF-1.70, TOP COAT PER VF-1.182, MIDDLE HOLES ARE 3.11 APART INSTEAD OF 3.10 | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
|
|