|
|
|
National Stock Number:
5365-01-541-5222
Federal Supply Class:
5365
National Item Identification Number:
015415222
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 4M49A4DL13P4 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.350 INCHES MINIMUM AND 0.380 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.625 INCHES NOMINAL | | FEATURES PROVIDED | NONSEPARABLE | | HOLE DIAMETER | 0.356 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.258 INCHES NOMINAL | | OVERALL LENGTH | 6.500 INCHES NOMINAL | | OVERALL THICKNESS | 0.032 INCHES NOMINAL | | OVERALL WIDTH | 0.516 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | INAVY: SPACER, PLATE; DWG: SHIM - GANG CHANNEL | | MATERIAL | ALUMINUM ALLOY 2024 | | SPECIAL FEATURES | MATL IS 2024 - T3 ALLUMINUM ALLOY; PRIMED CHANNEL; THREAD SIZE: 0.250-28 | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS | | TEMP RATING | 500.0 FAHRENHEIT |
|
|