|
|
National Stock Number: 5365-01-538-2731
Federal Supply Class: 5365
National Item Identification Number: 015382731
Description: SHIM
Detail: A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
89010018 | 12339 | DRS TRAINING & CONTROL SYSTEMS, LLC |
|
Techincal Specification:
CONSTRUCTION | ONE-PIECE | OVERALL THICKNESS | 0.005 INCHES NOMINAL | MATERIAL | STEEL COMP 302 | SPECIAL FEATURES | ITEM MEASURES 1.729 WIDE AND 1.75 LONG. ALONG THE LENGTH THERE ARE 3 CUT OUTS ON EACH SIDE THAT ARE .281 WIDE , .39 DEEP WITH A FULL RADIUS. THE CENTER OF 1 ST CUT OUT IS LOCATED .375 FROM THE END ON EACH SIDE, FROM THE CENTER OF ONE CUT OUT TO THE CENTER OF THE NEXT CUT OUT IS .50 ON EACH SIDE. MATERIAL IS SST TYPE 302 FULL HARD | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 TYPE VI FED SPEC SINGLE TREATMENT RESPONSE | SURFACE TREATMENT | PASSIVATE |
|
|