|
|
|
National Stock Number:
5365-01-536-5687
Federal Supply Class:
5365
National Item Identification Number:
015365687
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 5HL72070-115 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| OVERALL WIDTH | 2.000 INCHES MINIMUM AND 2.060 INCHES MAXIMUM | | SPECIAL FEATURES | NO FINISH | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.484 INCHES MINIMUM AND 1.504 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM | | CONSTRUCTION | LAMINATED | | HOLE DIAMETER | 0.279 INCHES MINIMUM AND 0.291 INCHES MAXIMUM | | LAMINATION QUANTITY | 10 | | LAMINATION THICKNESS | 0.003 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-22499,COMP 5,TY II,CL 2 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | TITANIUM ALLOY | | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER - FAIRING,ARRESTING GEAR | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.485 INCHES MINIMUM AND 0.545 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.665 INCHES MINIMUM AND 0.725 INCHES MAXIMUM | | OVERALL LENGTH | 2.854 INCHES MINIMUM AND 2.914 INCHES MAXIMUM | | OVERALL THICKNESS | 0.032 INCHES MINIMUM AND 0.092 INCHES MAXIMUM |
|
|