|
|
|
National Stock Number:
5365-01-536-0767
Federal Supply Class:
5365
National Item Identification Number:
015360767
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 5HP78521-131 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-9047, 6AL-4V MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | TITANIUM ALLOY | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SPACER, SLEEVE | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL THICKNESS | 0.114 INCHES MINIMUM AND 0.134 INCHES MAXIMUM | | SPECIAL FEATURES | ITEM HAS A NONCENTRALLY LOCATED 0.6350 - 0.6450 DIA APERTURE, CENTER OF APERTURE IS LOCATED 0.2600 BELOW THE CENTER OF THE ITEM. IT HAS(2)0.078 DIA PILOT HOLES FOR 0.10 DOWEL PINS, LOCATED ON A 0.6350 - 0.6450 BOLT HOLE CIRCLE, 0.3341 ABOVE THE CENTER OF THE APERTURE. ITEM IS CIRCULAR IN NATURE WITH A OD 1.240 - 1.260 DIA ABOVE THE APERTURE AND A OD OF 1.50 BELOW APERTURE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2486 ASSN STD SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PHOSPHATE |
|
|