|
|
|
National Stock Number:
5365-01-536-0465
Federal Supply Class:
5365
National Item Identification Number:
015360465
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 5HL11332-101 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4911 T1, 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | TITANIUM ALLOY UNS R56400 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM-MAIN LANDING GEAR DOOR | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 2.790 INCHES MINIMUM AND 2.850 INCHES MAXIMUM | | OVERALL THICKNESS | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM | | OVERALL WIDTH | 2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM | | SKEWED ANGLE | 6.5 DEGREES | | SPECIAL FEATURES | ITEM HAS 4 HOLES 0.280 - 0.287 DIA, ONE LOCATED IN EACH CORNER 0.500 FROM EACH EDGE. CORNERS HAVE A .50 RADIUS. SIDE OF PARALLELOGRAM ANGLE TO THE LEFT INSTEAD OF THE RIGHT | | STYLE DESIGNATOR | PARALLELOGRAM |
|
|