|
|
|
National Stock Number:
5365-01-533-9372
Federal Supply Class:
5365
National Item Identification Number:
015339372
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 512-6408362 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 512-6408362 FIND 7 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 3 | | CONSTRUCTION | ONE-PIECE | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-2698 GR-A, CL-U MIL SPEC ALL MATERIAL RESPONSES | | MATERIAL | STEEL CORROSION RESISTING | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL THICKNESS | 0.250 INCHES NOMINAL | | SPECIAL FEATURES | EXPORT CONTROL DWG NOT TO BE RELEASED OUTSIDE USA | | SUPPLEMENTARY FEATURES | SHIM IS 3.50 IN WIDE AND 3.50 IN LONG 2 OPISITE CORNERS AS CUT 1.25 IN 45 DEG. 3 HOLES 0.404MIN0.414 MAX DIA ON ONE SIDE OF SHIM |
|
|