|
|
|
National Stock Number:
5365-01-528-3663
Federal Supply Class:
5365
National Item Identification Number:
015283663
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 825816-7 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM, SOLID | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL THICKNESS | 0.060 INCHES NOMINAL | | SPECIAL FEATURES | ITEM IS A MODIFIED RECTANGLE IN SHAPE. THE BOTTOM RIGHT CORNER IS GREATLY ANGLED; THERE ARE FOUR BOLT HOLES; THE LENGTH FROM CENTER OF EACH BOLT HOLE WHICH ARE IN THE CORNERS OF THE SHIM MEASURES 1.830 INCHES; THE BOLT HOLES ARE 0.215 INCHES MIN AND0.223 INCHES MAX IN RADIUS; THE CORNERS ARE ROUNDED AT A R OF 0.285 INCHES; THE WIDTH OF THE SHIM ON THE STRAIGHT END IS 1.184 INCHES FROM CENTER OF EACH BOLT HOLE; THE BOTTOM LENGTH EDGE WHICH HAS THE ANGLE HAS A LENGTH OF 0.815 INCHES FROM CENTER OF BOLT HOLE TO THE OTHER; THE THICKNESS OF THE SHIM IS 0.0595 MIN AND 0.0605 INCHES MAX; MATT NOT SPECIFIED |
|
|