|
|
|
National Stock Number:
5365-01-527-1965
Federal Supply Class:
5365
National Item Identification Number:
015271965
Description:
SPACER,SPECIAL SHAPED
Detail:
A METALLIC OR NONMETALLIC ITEM OF VARIOUS PERIPHERAL SHAPES AND A SOLID CROSS-SECTION. IT IS DESIGNED TO MAINTAIN A PREDETERMINED DISTANCE BETWEEN TWO SURFACES. IT MAY HAVE FLAT PARALLEL BEARING SURFACES. DO NOT USE IF A MORE SPECIFIC NAME APPLIES. SEE ALSO SPACER, RING; SPACER, PLATE; SPACER, SLEEVE; SPACER, STEPPED; SHIM AND WASHER, FLAT.
|
Manufacturer Information:
| 2194928 | 52661 | RTX CORPORATION | | 2194928 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SPACER NUMBER 6 BEARING SEAL, INTERMEDIATE | | PROPRIETARY CHARACTERISTICS | PACS | | SPECIAL FEATURES | DRAWING EXPORT CONTROLLED NOT TO BE RELEASED OUTSIDE THE USA; SPACER CUT OUT ON EITHER END, ON THE SAME LEGNTH EDGE. OVER ALL LENGTH OF NOT CUT OUT LENGTH EDGE IS 4.586 IN MAX /4.576 IN MIN; THE CUT OUT PROTIONS LENGTH TO OTHER CUT OUT EDGE IS 4.060 IN MIN/4.070 IN MAX; THERE IS A FILLET CUT INTO AREA BETWEEN DEEPEST CUT AND LONGEST LENGTH. FILLET IS 0.210 IN MIN/ 0.220 IN MAX ABOVE DEEPEST CUT WITH LENGTH OF NOMIAL LENGTH OF 4.581; THERE IS A HARD FACE COATING PER SPEC PWA 50- DIMENSIONS ARE AFTER HARD COAT; MATERIAL IS AMS 6322 OR 6323 STEEL; HEAT TREATMENT PER PWA 11-22; THE FILLET IS MR 0.030 IN MIN AND 0.050 IN MAX, THE WIDTH OF CUT OUT SECTION IS 0.400 IN MIN/0.403 IN MAX, FROM LENGTH EDGE ABOVE FILLET, WIDTH BELOW FILLET TO LENGTH EDGE IS 0.350 IN MIN/0.360IN MAX, FULL WIDTH IS 0.674 IN MIN/0.676 IN MAX; THERE IS A MIDDLE SECTION MEASUREMENT OF 3.689 IN MIN AND 3.690 IN MAX |
|
|