|
|
|
National Stock Number:
5365-01-527-0638
Federal Supply Class:
5365
National Item Identification Number:
015270638
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 5PTC1013E20E | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| APERTURE DIAMETER | 1.255 INCHES MINIMUM AND 1.275 INCHES MAXIMUM | | CONSTRUCTION | LAMINATED | | LAMINATION QUANTITY | 21 | | LAMINATION THICKNESS | 0.003 INCHES NOMINAL | | MATERIAL | STEEL COMP 302 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM, WASHER, LAMINATED | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 1.995 INCHES MINIMUM AND 2.020 INCHES MAXIMUM | | OVERALL THICKNESS | 0.122 INCHES MINIMUM AND 0.137 INCHES MAXIMUM | | SPECIAL FEATURES | CENTER HOLE SHALL BE PUNCHED FROM LAMINATED SIDE ONLY, WITH NO EVIDENCE OF RAISED LAMINATE MATERIAL AROUND THE HOLE | | STYLE DESIGNATOR | CIRCULAR |
|
|