|
|
|
National Stock Number:
5365-01-526-9664
Federal Supply Class:
5365
National Item Identification Number:
015269664
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 1L3218-416S | 0FEV5 | SARGENT AEROSPACE A DOVER DIVERSIFIED CO |
|
Techincal Specification:
| APERTURE DIAMETER | 0.251 INCHES MINIMUM AND 0.261 INCHES MAXIMUM | | CONSTRUCTION | LAMINATED | | LAMINATION QUANTITY | 16 | | LAMINATION THICKNESS | 0.002 INCHES NOMINAL | | OUTSIDE DIAMETER | 0.355 INCHES MINIMUM AND 0.365 INCHES MAXIMUM | | OVERALL THICKNESS | 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | -8 CRES MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER LAMINATED SHIM | | STYLE DESIGNATOR | CIRCULAR |
|
|