|
|
|
National Stock Number:
5365-01-526-7656
Federal Supply Class:
5365
National Item Identification Number:
015267656
Description:
SPACER,SPECIAL SHAPED
Detail:
A METALLIC OR NONMETALLIC ITEM OF VARIOUS PERIPHERAL SHAPES AND A SOLID CROSS-SECTION. IT IS DESIGNED TO MAINTAIN A PREDETERMINED DISTANCE BETWEEN TWO SURFACES. IT MAY HAVE FLAT PARALLEL BEARING SURFACES. DO NOT USE IF A MORE SPECIFIC NAME APPLIES. SEE ALSO SPACER, RING; SPACER, PLATE; SPACER, SLEEVE; SPACER, STEPPED; SHIM AND WASHER, FLAT.
|
Manufacturer Information:
| 9000952 | 3J458 | RAYTHEON COMPANY |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 4 | | BOLT HOLE DIAMETER | 0.220 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SPACER, HINGE | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 12.000 INCHES NOMINAL | | OVERALL WIDTH | 1.000 INCHES NOMINAL | | SPECIAL FEATURES | SPACER HINGE HAS RAISED PEGS PARALLEL TO THE BOLT HOLES, THERE IS A RAISED SIDE WHICH IS A 0.500 INCH WIDTH OF THE PIECE'S TOTAL 1.0" WIDTH WHICH RUN THE FULL LENGTH OF THE SPACER, THE PEGS ARE ON THE RAISED SIDES WITH A FILLET 0.06 R BETWEEN THE TWO LEVELS , THE THICKNESS ON THE RAISED SIDE IS 0.375", ON THE OTHER SIDE IT IS 0.120", THE PEGS AND BOLTS HOLES ARE SPACED AT 0.750" FROM THE END, 3.500" FROM THE END, 7.00" FROM THE END AND 12.00" FROM THE END, THE DISTANCE BETWEEN THE BOLT HOLES AND THE PEGS IS 0.5"; THE PEGS ARE SET IN 0.25" FROM THE LENGTH EDGE, THE CORNERS OF THE SPACER ARE CHAMFERED AT AN ANGLE OF 45 DEGREES AND 0.12" IN LENGTH |
|
|