|
|
|
National Stock Number:
5365-01-525-6761
Federal Supply Class:
5365
National Item Identification Number:
015256761
Description:
SPACER,RING
Detail:
A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE.
|
Manufacturer Information:
| 767636-3 | 96124 | TRANSDIGM INC |
|
Techincal Specification:
| INSIDE DIAMETER | 0.680 INCHES MINIMUM AND 0.700 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OR QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 OR STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 0.810 INCHES MINIMUM AND 0.830 INCHES MAXIMUM | | OVERALL THICKNESS | 0.039 INCHES MINIMUM AND 0.041 INCHES MAXIMUM | | SPECIAL FEATURES | MATERIAL IS 300 SERIES CRES WITH 1/4 OR 1/2 HARD | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35, TYPE I, II, OR III FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|