|
|
|
National Stock Number:
5365-01-525-5647
Federal Supply Class:
5365
National Item Identification Number:
015255647
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 2071M91P04 | 07482 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| APERTURE DIAMETER | 0.191 INCHES MINIMUM AND 0.196 INCHES MAXIMUM | | BEARING SURFACE WIDTH | 0.153 INCHES NOMINAL | | GAGE RING OUTSIDE DIAMETER | 0.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5772 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | COBALT COMP HS188 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SPACER | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 0.680 INCHES MINIMUM AND 0.720 INCHES MAXIMUM | | OVERALL THICKNESS | 0.160 INCHES MINIMUM AND 0.180 INCHES MAXIMUM | | SPECIAL FEATURES | OUTSIDE DIA OF BASE IS .31 TO .33 INCHES; BASE CONTINUES UP STRAIGHT 0.115 TO 0.125 INCHESTO FLANGE; FLANGE IS STRAIGHT OUT 0.250 IN FROM CENTER OF APETURE, THEN BOTTOM SIDE ANGLES UP AT 8 DEG AND TOP EDGE ANGLES DOWN AT 15 DEG UNTIL THICKNESS MEASURED 0.020 IN | | STYLE DESIGNATOR | CIRCULAR |
|
|