|
|
|
National Stock Number:
5365-01-524-9907
Federal Supply Class:
5365
National Item Identification Number:
015249907
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 239A715-8 | 03640 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/4 T3 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2024 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BEARING PLATES, DIRCM XMTR | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL THICKNESS | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM | | OVERALL WIDTH | 3.720 INCHES MINIMUM AND 3.780 INCHES MAXIMUM | | SKEWED ANGLE | 25.0 RADIANS | | SPECIAL FEATURES | VREFERENCE DRAWING GROUP A NUMBER 38 WOULD HAVE TO BE TURNED 90 DEGREE LEFT FOR TOP. EVEN NUMBERS ARE CONCAVE AND THE R25 IS ON NEARSIDE. RIGHT SIDE IS 3.62 AND BOTTOM RIGHT SIDE IS 5.27 IS BEFORE RADIAN TO TOP RIGHT SIDE IS 1.65. | | STYLE DESIGNATOR | PARALLELOGRAM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541. CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE |
|
|