|
|
National Stock Number: 5365-01-524-8255
Federal Supply Class: 5365
National Item Identification Number: 015248255
Description: SHIM
Detail: A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
12492089 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 1.500 INCHES NOMINAL | BOLT HOLE QUANTITY | 3 | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.000 INCHES NOMINAL | HOLE DIAMETER | 0.754 INCHES NOMINAL | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 1.120 INCHES NOMINAL | OVERALL LENGTH | 5.930 INCHES NOMINAL | OVERALL THICKNESS | 0.032 INCHES NOMINAL | OVERALL WIDTH | 3.000 INCHES NOMINAL | MATERIAL | COPPER ALLOY 260 | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM, REAR DOOR HINGE | SPECIAL FEATURES | REMOVE ALL BURRS AND BREAK SHARP EDGES | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS | SUPPLEMENTARY FEATURES | CORNER RADIUS .04 MAXIMUM |
|
|