|
|
|
National Stock Number:
5365-01-521-9676
Federal Supply Class:
5365
National Item Identification Number:
015219676
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 17P1B2701-13 | 88277 | THE BOEING COMPANY |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 6 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.985 INCHES MINIMUM AND 3.015 INCHES MAXIMUM | | HOLE DIAMETER | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM | | OVERALL LENGTH | 16.470 INCHES MINIMUM AND 16.530 INCHES MAXIMUM | | OVERALL THICKNESS | 0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM | | OVERALL WIDTH | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | L-P-410 NYLON 6/6 WEAR RESISTANT BLACK, NYLON POLYAMIDE MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | PLASTIC POLYAMIDE | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
|
|