|
|
|
National Stock Number:
5365-01-521-7392
Federal Supply Class:
5365
National Item Identification Number:
015217392
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 784653 | 73030 | HAMILTON SUNDSTRAND CORPORATION | | 784653-6 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| APERTURE DIAMETER | 0.340 INCHES MINIMUM AND 0.360 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.330 INCHES NOMINAL | | END RADIUS | 0.170 INCHES NOMINAL | | HOLE DIAMETER | 0.185 INCHES MINIMUM AND 0.191 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5519 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | INAVY: SHIM, SOLID | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 1.202 INCHES NOMINAL | | OVERALL THICKNESS | 0.030 INCHES NOMINAL | | SIDE RADIUS | 0.560 INCHES MINIMUM AND 0.600 INCHES MAXIMUM | | SPECIAL FEATURES | HARDNESS 372 HV MIN | | STYLE DESIGNATOR | NON-CIRCULAR W/RADIUS |
|
|