|
|
|
National Stock Number:
5365-01-521-6736
Federal Supply Class:
5365
National Item Identification Number:
015216736
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 7379270 ITEM NO. 31 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7379272-1 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| CONSTRUCTION | ONE-PIECE | | OVERALL LENGTH | 8.880 INCHES NOMINAL | | OVERALL THICKNESS | 1.350 INCHES NOMINAL | | OVERALL WIDTH | 8.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | UNS S30200 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 | | SKEWED ANGLE | 45.0 DEGREES | | SPECIAL FEATURES | ANGLED ON LEFT/LONG EDGE ONLY; HAS 2 LINES OF HOLES, 0.563 INCH IN DIAM ETER: 3 HOLES CENTERED 1.50 INCH FROM TOP EDGE AND 1.25, 3.75 AND 6.75 INCHES FROM RIGHT AND 3 HOLES WITH SAME SPACING FROM RIGHT EDGE ON LINE 6.50 INCHES FROM TOP | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM, DOOR, FORWARD | | STYLE DESIGNATOR | PARALLELOGRAM |
|
|