|
|
|
National Stock Number:
5365-01-521-3515
Federal Supply Class:
5365
National Item Identification Number:
015213515
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 596-7409235-22 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 596-7410378-22 | 53711 | NAVAL SEA SYSTEMS COMMAND | | B434-5300-22 | 96169 | ELECTRIC BOAT CORPORATION | | B434-5320-22 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 4 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.750 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.130 INCHES NOMINAL | | HOLE DIAMETER | 0.281 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 1.000 INCHES NOMINAL | | OVERALL LENGTH | 5.000 INCHES NOMINAL | | OVERALL THICKNESS | 0.250 INCHES NOMINAL | | OVERALL WIDTH | 1.500 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | GUIDE, FORWARD AND AFT | | MATERIAL DOCUMENT AND CLASSIFICATION | 83616/CA2.12480 OR 52780/DELRIN CMPSN-AF-DE-588 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | PLASTIC ACETAL | | SPECIAL FEATURES | BENDS BACKWARDS 45 DEGREES, 2.55 INCHES FROM TOP; TOP EDGE BEVELED; HOLES ARE 0.281 THRU C/S 0.57 X 82 DEG | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
|
|