|
|
|
National Stock Number:
5365-01-521-3503
Federal Supply Class:
5365
National Item Identification Number:
015213503
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 029694-1 | 59027 | MEGGITT DEFENSE SYSTEMS, INC. DBA MEGGITT WESTERN DESIGN | | 029694-1 | 62228 | MEGGITT DEFENSE SYSTEMS, INC. |
|
Techincal Specification:
| OVERALL LENGTH | 4.190 INCHES MINIMUM AND 4.210 INCHES MAXIMUM | | OVERALL THICKNESS | 0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM | | OVERALL WIDTH | 3.240 INCHES MINIMUM AND 3.260 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-25043, CONDITION A MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 631 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM CHANNEL ADAPTER BRACKET | | SPECIAL FEATURES | ITEM HAS 3 HOLES .531 IN DIA LOCATED ALONG THE LENGTH .975 IN FROM THE EDGE, 1ST HOLE IS .35 IN FROM END, 2ND HOLE IS 2.10 IN FROM END, 3RD HOLE IS 3.85 FROM END WITH ANOTHER HOLE THE SAME DIA LOCATED THE DISTANCE FROM THE END & 2.275 FROM THE EDGE; THERE ARE 2 HOLES .406 IN DIA LOCATED ALONG THE LENGTH .475 FROM END & 2.637 FROM THE EDGE THAT THE OTHER HOLES ARE ALONG. | | STYLE DESIGNATOR | RECTANGULAR | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 TYPE IAW QQ-P-35 GUIDANCE FED SPEC 1ST TREATMENT RESPONSE AND MIL-C-13924, CLASS 4 MIL SPEC 2ND TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE AND OXIDE |
|
|