|
|
|
National Stock Number:
5365-01-521-1782
Federal Supply Class:
5365
National Item Identification Number:
015211782
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 10341568 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 4M49 | 76301 | THE BOEING COMPANY | | 4M49A4DM12P2 | 19904 | STROCO MANUFACTURING, INC. | | 4M49A4DM12P2 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.258 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.500 INCHES NOMINAL | | HOLE DIAMETER | 0.356 INCHES MINIMUM AND 0.366 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.310 INCHES MINIMUM AND 0.340 INCHES MAXIMUM | | OVERALL LENGTH | 2.260 INCHES NOMINAL | | OVERALL THICKNESS | 0.063 INCHES NOMINAL | | OVERALL WIDTH | 0.486 INCHES MINIMUM AND 0.516 INCHES MAXIMUM | | PART NAME ASSIGNED BY CONTROLLING AGENCY | INAVY: SPACER, PLATE | | MATERIAL DOCUMENT AND CLASSIFICATION | 250/5 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2024 | | SPECIAL FEATURES | UNPRIMED ALUMINUM ALLOY AND CRES SHIMS HAVE BEEN SUPERCEDED BY PRIMED SHIMS. UNPRIMED SHIMS MAY BE REWORKED BY PRIMING IN ACCORDANCE WITH PARA 3.3.2 OR 3.3.3. 48 INCH STOCK LENGTHS ARE STANDARD. | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 85582 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PRIMER |
|
|