5365-01-520-7779 SHIM Index 5365-01-520-7781 SHIM

National Stock Number:
5365-01-520-7780

Federal Supply Class:
5365

National Item Identification Number:
015207780

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.


Manufacturer Information:
5PTC7008F00804281205THE BOEING COMPANY


Techincal Specification:
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-T-9046, AB-1 ANNEALED CONDITION MIL SPEC ALL MATERIAL RESPONSES
MATERIALTITANIUM ALLOY UNS R56400
PART NAME ASSIGNED BY CONTROLLING AGENCYSHIM, SOLID TITANIUM
PROPRIETARY CHARACTERISTICSPACS
OVERALL LENGTH4.080 INCHES MINIMUM AND 4.320 INCHES MAXIMUM
OVERALL THICKNESS0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM
OVERALL WIDTH0.680 INCHES MINIMUM AND 0.920 INCHES MAXIMUM
SPECIAL FEATURESMAY BE MADE FROM 5PTC7006 SOLID SHIM STOCK
STYLE DESIGNATORRECTANGULAR


Click here to Register for Free 30-day Trial