|
|
|
National Stock Number:
5365-01-519-3943
Federal Supply Class:
5365
National Item Identification Number:
015193943
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 816-3639-001 | 13499 | ROCKWELL COLLINS, INC. |
|
Techincal Specification:
| APERTURE LENGTH | 1.620 INCHES MINIMUM AND 1.660 INCHES MAXIMUM | | APERTURE WIDTH | 0.180 INCHES MINIMUM AND 0.220 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.992 INCHES MINIMUM AND 1.008 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.472 INCHES MINIMUM AND 0.488 INCHES MAXIMUM | | HOLE DIAMETER | 0.094 INCHES MINIMUM AND 0.110 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-I-24768/2, TYPE GEE, NATURAL COLOR MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | PLASTIC | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SPACER, CONNECTOR | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.090 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | OVERALL LENGTH | 1.880 INCHES MINIMUM AND 1.920 INCHES MAXIMUM | | OVERALL THICKNESS | 0.063 INCHES NOMINAL | | OVERALL WIDTH | 0.680 INCHES MINIMUM AND 0.720 INCHES MAXIMUM | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
|
|