|
|
|
National Stock Number:
5365-01-518-9870
Federal Supply Class:
5365
National Item Identification Number:
015189870
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 6393024-1 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| APERTURE DIAMETER | 0.204 INCHES MINIMUM AND 0.210 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | L-P-392,TYPE 1,CLASS 1 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | PLASTIC ACETAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PAD | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.250 INCHES NOMINAL | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.250 INCHES NOMINAL | | OVERALL LENGTH | 1.500 INCHES NOMINAL | | OVERALL THICKNESS | 0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM | | OVERALL WIDTH | 0.998 INCHES MINIMUM AND 1.020 INCHES MAXIMUM | | SPECIAL FEATURES | DRAWING IS EXPORT CONTROLLED IS NOT AUTHORIZED TO BE RELEASED OUTSIDE USA.APERTURE IS DRILLED TO 0.206 + OR - 0.005 AND IS COUNTERSUNK 0.580 + .016 OR - .000 X 100 DEGREES. | | STYLE DESIGNATOR | NON-CIRCULAR W/O BOLT HOLES |
|
|