|
|
|
National Stock Number:
5365-01-518-7648
Federal Supply Class:
5365
National Item Identification Number:
015187648
Description:
SPACER,RING
Detail:
A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE.
|
Manufacturer Information:
| 596-7409234-13 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 596-7410503 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 596-7410503-34 | 53711 | NAVAL SEA SYSTEMS COMMAND | | B434-5216-34 | 96169 | ELECTRIC BOAT CORPORATION | | B434-5220-13 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| INSIDE DIAMETER | 4.880 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281, CLASS A, FORM 5, COND HF (ANL) FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | COPPER ALLOY | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 6.375 INCHES NOMINAL | | OVERALL THICKNESS | 0.250 INCHES NOMINAL | | SPECIAL FEATURES | DRAWING IS EXPORT CONTROLLED IS NOT AUTHORIZED TO BE RELEASED OUTSIDE USA. ALL HOLES ARE ON A 5.500 INCH CENTER. 6 HOLES 0.531 THRU, 2 HOLES 0.440 THRU. | | SURFACE FINISH | 125.0 MICROINCHES OVERALL |
|
|