|
|
|
National Stock Number:
5365-01-518-3727
Federal Supply Class:
5365
National Item Identification Number:
015183727
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 874261-5 | 5RQL2 | DRS ENVIRONMENTAL SYSTEMS INC | | 874261-5 | 98255 | DRS SUSTAINMENT SYSTEMS INC |
|
Techincal Specification:
| OVERALL LENGTH | 11.430 INCHES MINIMUM AND 11.490 INCHES MAXIMUM | | OVERALL THICKNESS | 0.075 INCHES MINIMUM AND 0.105 INCHES MAXIMUM | | OVERALL WIDTH | 2.610 INCHES MINIMUM AND 2.670 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11, T6 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/11, T4 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-250/8, H3 FED SPEC 3RD MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 5052 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SPACER, METAL | | SPECIAL FEATURES | CONVERSION COATE PER MIL-C-5541, CALSS 1A. ITEM CONTAINS 8 .196 DIA HOLES. 1ST HOLE LOCATED .5 FROM RT EDGE &1.60 FROM BOTTOM; 4TH HOLE LOCATED 2.917 TO LT OF 1ST HOLE ON SAME CENTERLINE; 3RD HOLE LOCATED 1.08 RT OF 4TH HOLE & .274 BELOW CENTERLINE OF 4TH HOLE;2ND HOLE LOCATED .750 TO RT OF 3RD HOLE ON SAME CENTERLINE AS 3RD HOLE; 5TH HOLE LOCATED ON SAME CENTERLINE AS 1STHOLE & IS 5.834 TO LT OF 1ST HOLE; 6THHOLE LOCATED 2.998 TO LT OF 5TH HOLE &.352 BELOW CENTERLINE OF 5TH HOLE; 7THHOLE LOCATED 4.746 LT OF 5TH HOLE & .842 BELOW CENTERLINE OF 5TH HOLE; 8TH HOLE 0OCATED 4.928 TO LT OF 5TH HOLE & .784 ABOVE CENTERLINE OF 5TH HOLE | | STYLE DESIGNATOR | RECTANGULAR |
|
|