|
|
|
National Stock Number:
5365-01-517-4906
Federal Supply Class:
5365
National Item Identification Number:
015174906
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 5793302 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 5793302 FIND 061 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 5793302 FIND 61 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 6393449 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 6393449-08 | 31442 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 6393449-8 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 3 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.380 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.300 INCHES NOMINAL | | HOLE DIAMETER | 0.406 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-22499/3-013 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.630 INCHES NOMINAL | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.380 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.450 INCHES NOMINAL | | OVERALL LENGTH | 3.500 INCHES NOMINAL | | OVERALL THICKNESS | 0.062 INCHES NOMINAL | | OVERALL WIDTH | 1.630 INCHES NOMINAL | | SPECIAL FEATURES | LAMINATED SHIM | | STYLE DESIGNATOR | NON-CIRCULAR W/BEVELED CORNERS |
|
|