|
|
|
National Stock Number:
5365-01-517-1704
Federal Supply Class:
5365
National Item Identification Number:
015171704
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 5HW82808-165 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| SPECIAL FEATURES | MADE FROM 5PTC1001H64C32. ITEM IS CRESENT SHAPED AND MEASURES 2.760 LONG AND .300 AT THE WIDEST POINT, IT IS TAPERED ON THE INSIDE EDGE. | | CONSTRUCTION | LAMINATED | | LAMINATION QUANTITY | 10 | | LAMINATION THICKNESS | 0.003 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-22499, COMP 5, TYPE II, CLASS 2 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | TITANIUM ALLOY | | PART NAME ASSIGNED BY CONTROLLING AGENCY | RADIUS FILLER | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL THICKNESS | 0.060 INCHES NOMINAL |
|
|